Swiss Disinfect Professional AIR is a highly stable water sodium chloride compound that disinfects room surfaces and air by cold fogging distribution with air humidifiers and air conditioning units. We provide a highly concentrated ready-to-use version Swiss Disinfect Professional Air in a 5-litre container. 


In an electrochemical manufacturing process, a solution is obtained which is PH-neutral and at the same time has a very high redox voltage. The redox voltage of Swiss Disinfect Professional AIR is over 750 millivolts (mV). The redox voltage is a measure for the germicidal and oxidative effect of disinfectants. Tap water has an average redox voltage of approx. +300 mV. At a redox voltage of approx. +500 mV, water is already sterile and from +550 mV it has a disinfecting effect. At a redox voltage of +750 mV, as with Swiss Desinfect Professional AIR, the water has a very strong disinfecting effect and eliminates bacteria within seconds, viruses, fungi and spores within a few minutes.

Unique Technology

In contrast to conventional room or surface disinfectants, Swiss Disinfect Professional AIR is completely harmless during application, as no toxic decomposition products or residues are produced. The treated surfaces and premises can be used again as usual immediately after application.

  • Eliminates bacteria within seconds and viruses, germs and fungi reliably within minutes

  • Neutralizes all bacterial odours (e.g. lactic acid)

  • Non-toxic to humans and the environment

  • Dermatologically tested and classified „VERY GOOD“,

  • No corrosive or toxic residues (Dermatest)

  • Applicable on all surfaces or materials (metal, plastic, leather, etc.)

  • Heat and cold resistant

  • Shelf life guaranteed for more than 24months after opening when properly stored

  • ECHA PT1, PT2, PT3 and PT4 classified

  • Distribution by air conditioning and cold fogging may take place during the presence of humans and animals

  • Halal certified by HCS


With its unique hygiene technologies, Swiss Hygiene Technologies offers solutions for a globally relevant problem. The combination of the products also enables comprehensive prevention of the spread of germs and infections on an entirely new level. In partnership with recognized universities and institutes, field studies have been conducted in order to prepare for the widespread introduction of the products in the hygiene and medical sectors.

Biokinetic tests

Extensive kinetic tests were carried out on a number of multi-resistant germs and fungi. Fast and effective reduction of the germs could be demonstrated in all areas, by 99,99% (log 4 reduction)

  • Staphylococcus aureus

  • Staphylococcus epidermidis MRSE 

  • Escherichia coli

  • Klebsiella pneumoniae Laboklin

  • Pseudomonas aeruginosa

  • Acinetobacter baumanii

  • Candida albicans

  • Stachybotrys chartarum

  • Xylella Fastidosa

  • Pyricularia oryzae

Virus tests

Tests on poliovirus, type 1 (LSc-2ab) were able to demonstrate sufficient viral efficacy after the shortest exposure time (t = 5 min). The successful virus inactivation of the product on an unenveloped virus shows the potential of the product as a virucide. It can also be used as an effective means of combating enveloped viruses, such as Influenza, Ebola and Corona viruses.

Application tests

In consultation with the hygiene officers of several hospitals in Austria, application tests of the product were carried out with cold fogging. By means of contact tests on a large number of surfaces, a significant reduction in CFU (germ-forming units) was demonstrated and the effectiveness of the product in practical use was confirmed several times.

  • Door handle (CFU reduced from 4 to 0)

  • Chair Patientroom (CFU redcued from 74 to 4)

  • Handle over bed (CFU redcued from 150 to 4)

  • Bedframe (CFU redcued from 31 to 0)

  • Calling Station (CFU redcued from 70 to 2)

  • Bathroom Table (CFU redcued from 43 to 0)

  • Toilet Surface (CFU redcued from 83 to 2)

  • Surface chair (CFU redcued from 64 to 9)


The product can be applied by air conditioning and cold fogging in rooms. This is done by automatically controlled room humidifiers, which, depending on the application area, apply a predefined quantity depending on the environment, thus ensuring optimum hygiene conditions in the air and on surfaces. Rooms of up to 500 m³ can be fully saturated in up to 30 minutes (average consumption 275 ml per operation cycle).

Application areas

  • Hospitals and Health Care

  • Industrial Parks,

  • Industry and production facilities

  • Hotels and Restaurants

  • Food processing

  • Public areas and shopping centers

  • Airports and public transport, including vehicles and facilities

  • Educational establishments

  • Places of Worship

  • Parks and beaches

  • Golf and football courses

  • Disinfection tunnels

  • Distribution via air conditioning, cold fogging, in the presence of humans, animals and plants